Zero air consumption module dryer

D H-Z series zero air consumption module dryer, integrated box appearance, module dryer main structure, filled with high-performance adsorbent, and through the high-vacuum micro-thermal regeneration technology, to ensure that the compressed air quality is up to standard, the regeneration of the whole process of “0” air consumption.

D H-Z series zero gas consumption modular dryer has three control modes, namely near control, remote control and self-control, integrated pressure/temperature/dew point sensors, including dual 4.85 communication and mobile + PC Internet of Things cloud monitoring platform, and through self-developed BO S S energy-saving P LC controller, it can real-time monitor the dynamics of the operation of the equipment and automatically adjust the adsorption cycle to ensure the stability of the dew point and at the same time, it can save energy and reduce the consumption to a greater extent. Meanwhile, in order to avoid the secondary pollution of liquid oil and water to the adsorbent, it is also equipped with self-developed independent sewage disposal device, which is discharged in time through the zero gas consumption drainer, and the rate of water removal is more than 9.5 %.

The biggest advantage of the D H-Z series of zero air consumption modular dryers is their energy savings, which are extremely impressive. Not only the BOSS energy-saving mode will automatically adjust the length of adsorption cycle to achieve energy saving and consumption reduction according to the logic of the magic formula algorithm, but also the power consumption of the whole machine is only ⅓ of that of the zero-gas-consumption double-tower dryer when regeneration is “0” gas consumption. Every year, it can save a lot of cost for users and help enterprises to develop sustainably.

Standard working conditions: working pressure 0.7Mpa ≤P≤0.8Mpa, inlet temperature T≤35℃;
Selection conditions: working pressure range 0.4Mpa ≤P≤1.0Mpa, inlet temperature range 2℃≤T≤40℃;
Technical indicators: pressure dew point ≤ -40 ℃, regeneration gas consumption ≤ 0% (vacuum micro-thermal regeneration), pressure loss ≤ 0.02Mpa, emission noise ≤ 75dB;

Advantage

• Integrated box design, beautiful and small footprint, convenient for transportation, installation and service;
• Non-pressure vessel design of adsorption module, no need for annual inspection of pressure vessel, the service life of the whole machine can be more than 20 years;
• Adsorption cross-sectional area of 1 : 1, even distribution of airflow without dead ends, eliminating the “tunnel effect”, high utilization rate of adsorbent;
• The adsorbent can be replaced by mold core, no need to fill on site, and the drying effect after replacement is the same as that of the new machine;
• Integrated zero gas consumption sewage device, reducing the risk of secondary pollution of the adsorbent and extending the service life of the adsorbent;
• The main body of the adsorption module is made of aluminum alloy, which is especially suitable for pharmaceutical and food industry applications;
• 0″ compressed air consumption in the whole process of dryer regeneration.
• High-vacuum micro thermal desorption regeneration, no regeneration dead angle, regeneration efficiency as high as 9 9.9%;
• Self-developed logic algorithm and energy-saving controller ensure that the dryer operates with low energy consumption;
• No need for cooling water blowing cold, eliminating the installation and purchase cost of circulating water system;
• Modular design of adsorption module, pressure loss ≤ 0 . 0 2 M p a, the reduction of pressure loss also means more energy saving;
• The power consumption of the whole machine is only ⅓ of that of the double-tower dryer with zero gas consumption, or even lower;